China High Quality Steel Roller Chain Sprocket 120b12 120b16 140b18 140b20 Catarina 160b15 160b18 160b19 40b12 40b16 40b18 dirt bike sprocket

Item Description

large quality steel roller chain sprocket 120B12 120B16 140B18 140B20 CATARINA 160B15 160B18 160B19 40B12 40B16 40B18
 

 

 1, all created by innovative CNC lathe, move ISO, ANSI,DIN good quality certification. higher precision and great use resistance.

 

 2, floor therapy is black, galvanization, chroming and coloured drawing.

 

 3, content is A3C45, stainless metal and buyer requirement. and with the processing of high frequency quenching.

 

 4, we also give nonstandard( according to the client drawings) and normal(the metric technique) sprockets

 

 5, extensive use: machinery, metallurgy, mine, build, electron, port etc..expert automation generation and conveying transmission gear

 

Features:

 

1. Warmth treatment: Harden tooth, tempering, queching

2.Surface area remedy: zinc plated, blacken, phopharization, carborized
3. Method: Forging( casting)—lathe- enamel shaping—finishing—oil washing—Packing ,created by CNC equipment

4. Inspection: All objects are checked and examined thoroughly for the duration of each and every functioning treatment and following the item is ultimately produced to make certain that the greatest quality product enter into the industry.

five. Durable, undesirable condition Resistance

Roller Chain Sprocket Finished Bore Sprockets

Chain sprocket or sprocket-wheel is a profiled wheel with enamel, or cogs, that mesh with a chain, track or other perforated or indented material. The identify ‘sprocket’ applies typically to any wheel on which radial projections engage a chain passing over it. It is distinguished from a equipment in that sprockets are in no way meshed with each other immediately, and differs from a pulley in that sprockets have tooth and pulleys are smooth.
Sprockets are utilised in bicycles, bikes, vehicles, tracked automobiles, and other equipment possibly to transmit rotary motion among 2 shafts in which gears are unsuitable or to impart linear motion to a monitor, tape and so forth. Perhaps the most common type of sprocket may possibly be located in the bicycle, in which the pedal shaft carries a massive sprocket-wheel, which drives a chain, which, in flip, drives a modest sprocket on the axle of the rear wheel. Early automobiles have been also mainly pushed by sprocket and chain mechanism, a exercise mostly copied from bicycles.

Our organization
HangZhou Stream Team Ltd is a professional manufacturer of bearings, gathering collectively creation and processing, domestic and overseas trade. The manufacturing facility specializes in the generation and export of numerous sorts of bearings: deep groove ball bearing, spherical roller bearing, tapered roller bearing, and so on. The custom-made bearings is also appropriate and the generation will be according to your specifications and samples.

All bearings in our manufacturing unit undertake intercontinental top quality requirements. The total equipment, stringent quality manage, superior Japanese engineering and good quality services give a guarantee to provide the high-top quality bearings for our buyers. Domestic income and provider network has covered 15 significant metropolitan areas in China, meanwhile our bearing has marketed far more than 60 overseas nations and areas.

If you are interested in any of our products or have an intention to order, make sure you come to feel totally free to get in touch with us.
Get in touch with Us
Bella
 

US $0.8
/ Piece
|
100 Pieces

(Min. Order)

###

Standard or Nonstandard: Standard
Application: Textile Machinery, Conveyer Equipment, Packaging Machinery, Electric Cars, Motorcycle, Food Machinery, Marine, Mining Equipment
Structure: Roller Chain
Material: Stainless Steel
Type: Short Pitch Chain
Transport Package: Box+Wooden Box

###

Customization:
US $0.8
/ Piece
|
100 Pieces

(Min. Order)

###

Standard or Nonstandard: Standard
Application: Textile Machinery, Conveyer Equipment, Packaging Machinery, Electric Cars, Motorcycle, Food Machinery, Marine, Mining Equipment
Structure: Roller Chain
Material: Stainless Steel
Type: Short Pitch Chain
Transport Package: Box+Wooden Box

###

Customization:

Sprocket Basics

When it comes to sprockets, it’s important to understand the basics of design. This includes chain size and number of teeth. The number of teeth will vary depending on the type of chain and application. When determining the number of teeth, the angle between the teeth should be at least 360 degrees.
sprocket

size

There are many factors to consider when choosing the correct sprocket size. The first thing to do is to determine if the sprocket is a double sprocket or a single sprocket. Also available in a variety of sizes. To determine the exact size, you should measure the distance between the grooves of the sprocket teeth and their opposite tooth slots. The distance between these two points is called the caliper diameter.
The size of the sprockets also varies depending on the type of chain. Large sprockets have arms, while smaller sprockets usually don’t. The arms reduce weight and inertia, making them more economical to operate. Some sprockets also have openings, which make them easier to assemble and disassemble. Some sprockets are also plated for a stronger construction. Some sprockets are manufactured with flame or induction hardened parts.
Sprockets are often used in conveyors, pallet conveyors and other conveying systems. The size of the sprocket should match the size of the chain. A caliper will help you determine if the sprocket has worn teeth. Another way to identify worn sprockets is to measure their diameter.
In addition to size, sprockets should have the correct pitch and center distance. This will help keep the roller chain taut. The chain should be clean and properly lubricated. There should be a small gap between the pin and bushing so that oil can pass through the sprocket and chain. In addition to this, the center-to-center distance between the chain and the sprocket should be at least 1.5 times the diameter of the sprocket.
The chain should have at least 17 teeth, which is common in the industry. Having smaller spacing will reduce mechanical losses and noise. However, larger sprocket sizes are best for applications with higher workloads.

Material

Sprockets are mechanical parts that mesh with the chain to move the chain. It is made of metal or reinforced plastic and usually resembles a gear. It is a gear design for a specific type of chain. Most sprocket and chain systems work the same way, although they vary in material and pitch.
There are three basic types of sprockets: single-strand, double-strand, and triple-strand. The length and number of teeth for each type are specified by various standards. For reference, the ISO-DIN standard is shown. Most sprockets are made of alloy steel and are case hardened and tempered in the tooth area. They also have a hub and a key for mounting.
Metal sprockets can be made of steel or aluminum alloys. While steel is a more durable material, aluminum sprockets are more attractive. Steel is the best material for long rides, while aluminum sprockets are better for casual riding.
In addition to automotive and industrial applications, sprockets are used in oil and gas, textile machinery, instrumentation and mechanical transmission. Many types of sprockets are interchangeable with each other. For added protection, they can also be galvanized to prevent rust. The main methods of galvanizing sprockets are hot-dip galvanizing and electro-galvanizing.
Sprockets are usually made of steel or aluminum. Their design is similar to that of gears, although they are more widely spaced than their counterparts. They can also span longer distances than gears, allowing them to be used for power transmission.
sprocket

Function

A chain drive is a common type of mechanical transmission in which sprockets are used to help reduce the speed of a moving object. Sprockets can have horizontal, vertical or inclined pitch and are usually used in pairs. The teeth of the sprocket mesh with the rollers on the drive chain, reducing the speed. These sprockets are usually made of metal, but can also be made of plastic or composite materials.
The role of the sprocket is to transmit motion from the output shaft of the engine to the rear wheels. For this, the front sprocket needs to rotate at the same speed as the engine output shaft. It can be mounted either on the drive track or on the front of the vehicle. A third sprocket can be connected to the drive track. In addition, the front sprocket is used to pull the drive chain. This will help transfer power from the engine to the rear wheels, allowing the motorcycle to travel forward. The side plates of the chain also help transmit chain tension.
The bushings are subjected to the tension applied to the chain as it passes through the sprockets thousands of times per minute. This puts pressure on the pin inside the bushing. Additionally, the pins must withstand bending and shearing forces transmitted from the plate to the bushing. The pins must also withstand impact and have high tensile strength. If the pin is worn, it will need to be replaced or repaired.
Sprockets power the chain-driven motion system and carry heavy loads. Proper selection of sprockets can prevent damage to your equipment. To do this, you need to select the appropriate sprocket based on the type of assembly and system specification.
sprocket

maintain

Sprocket maintenance is an important part of motorcycle maintenance. Failure to do so will result in frequent chain changes and additional costs. Regular maintenance of your chain will help ensure your chain will last 30,000 miles or more. By comparison, a poorly maintained chain only lasts 10,000 miles.
Checking the sprocket is very easy. First, remove the chain and align it. Next, check for any foreign objects. If you see a damaged sprocket, you need to replace it. If you can’t replace a worn sprocket, you can buy a new chain. However, the new chain will not last as long as the old one.
Check for signs of rust. Rust can form on the chain due to exposure to humidity and heat. When the pins or rollers get rusted, the seals are damaged. If the pins or rollers are rusted, it’s time to replace the chain.
Regular maintenance of the chain is important to prevent kinks and slippage. This can cause excessive wear on the sprockets and chain. If the teeth are worn, the chain will not be able to properly grip the sprocket, resulting in difficult shifting and severe vibration.
If your chain is several years old, it is important to lubricate it every few months to prevent rust. It is also important to clean the chain thoroughly before lubricating to keep it clean and lubricated. Non-petroleum-based cleaners can help remove grit that may have built up. If you use the chain for a long time, you will need to clean it every 300-600 miles.

China High Quality Steel Roller Chain Sprocket 120b12 120b16 140b18 140b20 Catarina 160b15 160b18 160b19 40b12 40b16 40b18     dirt bike sprocketChina High Quality Steel Roller Chain Sprocket 120b12 120b16 140b18 140b20 Catarina 160b15 160b18 160b19 40b12 40b16 40b18     dirt bike sprocket
editor by czh 2023-01-13